Hydraulic Heavy-Duty Shear For Waste Metal
Release time: 2023-11-10 sentiment:124 time
The characteristics of hydraulic heavy-duty shears include:
- Hydraulic drive, safe and reliable performance, and simple operation.
- The length of the working blade is available in various options such as 400mm, 600mm, 700mm, 800mm, 1000mm, and 1200mm, which can meet the needs of users with different scales and requirements.
- Wide range of cutting force, from 63 tons to 400 tons, suitable for users with different scales.
- No need for foot screws for installation, diesel engine can be used as power source in places without power supply.
- Suitable for metal recycling processing plants, scrap car dismantling yards, smelting and foundry industries, etc. It can be used for cold cutting and pressing flanging of various shaped steel profiles and various metal materials, as well as pressing molding of powdery products, plastics, fiberglass reinforced plastics, insulation materials, rubber, etc.
Nick Machine Shears are suitable for metal recycling companies, scrap steel plants, smelting and foundry enterprises to carry out cold-state cutting of various shapes of steel profiles and various metal structures.https://www.nickbaler.net
1 |
Main Cylinder |
Model |
351/280/210 |
Stroke |
800 |
315T |
|
|
Nominal Force |
1600KN |
Quantity |
2 Units |
|
2 |
Press Cylinder |
Model |
194/160/105 |
Stroke |
750 |
|
|
|
Nominal Force |
500KN |
Quantity |
2Units |
|
3 |
Feeding box closed Cylinder |
Model |
114/100/70 |
Stroke |
400mm |
|
|
|
Nominal Force |
180KN |
Quantity |
8Units |
|
4 |
Push Cylinder |
Model |
194/160/105 |
Stroke |
6000mm |
|
|
|
Nominal Force |
500KN |
Quantity |
1Unit |
|
5 |
Power |
37Kw*2Sets(Main Power)&3Kw(Cooling System) |
||||
6 |
Electricity |
Electricity 380V/50Hz(Three Phases and four Lines) |
||||
7 |
System work Pressure |
25Mpa |
||||
8 |
Max press Height |
700mm |
||||
9 |
Cutting Height |
400mm |
||||
10 |
Pump |
HY200 Plunger Pump*2sets |
||||
11 |
Capacity |
5-8T/H |
||||
12 |
Oil supplying system |
Two way cartridge valve(TAIFENG/KINEGEDE) |
||||
13 |
Control System |
1.PLC(FATEK from China TAIWAN ) 2.10’Touch screen(Weinview) 3.Fully automatic reversing valve 4.Control remote operation |
||||
14 |
Electrical components |
1.Low voltage power supply(CHNT) 2.Manometric component( MACOME) 3.Switch( Mibbo) |
||||
15 |
Cooling system |
Air cooling system |
||||
16 |
Control system |
PLC(FATEK) |
||||
17 |
Blade length(mm) |
1400 |
Inclination |
10 degree |
||
18 |
Feeding Box |
6000*1300*400mm |
||||
19 |
Cutting times |
2-3Time/Minute |
||||
20 |
Oil Tank |
2000L with high pressure oil filter |
||||
21 |
Machine weight |
27T |