Common problems of Italian hydraulic baler

The hydraulic baler has been widely used in the market, but in the course of use, some friends reported that the noise of the hydraulic baler occurred, which would have a great impact on the user's use in severe cases. Therefore, in order to better solve this problem, Next, we will understand the equipment noise problem.

The hydraulic drive used by the NICKBALER hydraulic baler is stable and reliable when working, and safety is guaranteed. However, there are user reactions. During the use of the hydraulic baler, noise will be emitted, but sometimes the noise is not there. What kind of phenomenon is this? 
For this problem, our company has made a summary, such as the occurrence of oil trapping in the oil pump, the large error of the gear oil pump tooth profile, the jamming of the blade or the plunger, etc. will cause noise, the valve core and the valve body are not well matched, or the surface Scratching, impurity in the oil blocking the valve hole, fatigue or damage of the spring in the valve, and inflexible movement of the spool will cause noise.
If there is a noise problem of the hydraulic baler, we must find the cause and deal with it as soon as possible, so as not to delay production and increase the cost of use. Our users should also learn more about relevant knowledge in daily use, and some minor problems should be timely. Solve it so as not to cause more trouble.
NICKBALER has been committed to the research of various hydraulic technologies for more than ten years, and has a team with rich experience and strong technical force. https://www.nkbalers.com