Solve the wear and tear of Dutch straw baler

As a large-scale machine, the straw baler will generally operate continuously for a long time. In long-term use, it will inevitably be worn out. After the straw baler is worn out, it will have a certain impact on the production efficiency of the equipment and reduce the company's income.

Therefore, the straw baler needs to be shut down immediately after wear and tear, and it can work normally after it is resolved.
Due to the uninterrupted operation of the straw baler, the temperature will continue to rise. When it stops working, the parts of the straw baler will cool down, and the volume of the connected parts will be affected by thermal expansion and contraction. When the pressure exceeds the maximum pressure resistance of the parts , It will break. In this case, it must be replaced in time. Therefore, in normal use, be sure to pay more attention to the use of parts.
If you find that the parts are deformed during the use of the straw baler, you must stop the machine for maintenance or replace with new parts. After the maintenance and replacement, you need to pay more attention to prevent the wear from happening again.
The maintenance of the straw baler needs to be measured from many aspects, and the load-bearing capacity of the parts must also be taken into account, otherwise the parts will be out of balance.
Nowadays, straw balers are widely used. We need to learn more about the use methods and failure solutions of the balers, which can not only ensure the normal use of the balers, but also reduce the probability of failure of the balers.
NICKBALER has strong technical force and advanced management concepts, and is committed to creating better value and better service for consumers. https://www.nkbalers.com