Overall structure of Polish scrap steel shearing machine

The scrap steel shearing machine is a kind of scrap steel processing equipment with multiple functions, high degree of automation and high operating efficiency.

The overall structure of the gantry shearing machine:
1. The hydraulic cylinder of the scrap steel shearing machine is a single-rod piston cylinder. The fixing method is a fixed cylinder. It consists of a pushing cylinder, a shearing cylinder, a pressing cylinder, and a side pressure cylinder. It is responsible for converting hydraulic energy into mechanical energy. To drive the actions of the execution sliders to complete the pressing and shearing actions on the scrap steel.
2. There is one pushing oil cylinder, which is installed on the support of the pushing table. The front part of the piston rod is equipped with pushing steel blocks. The pushing process of the scrap steel in the material box is completed by the forward and backward work of the piston of the pushing oil cylinder.
3. There is one piece (set) of the material pressing oil cylinder, which is installed on the gantry of the shearing machine. The head of the piston rod is connected with the material pressing steel block, and the material pushing device in the material box is completed by the rising and falling of the piston of the material pressing oil cylinder. Compressing action of the scrap steel to be cut.
4. There is one shearing oil cylinder, which is installed on the mast of the shearing machine. The head of the piston rod is connected with the shearing knife. The scrap steel compressed by the feeding device performs the shearing action. Due to the different models and the required shearing force, the design and use of the oil cylinder and its control valve block are also different.
The various models of NICKBALER scrap steel shears have reliable performance, convenient operation and simple maintenance. Diesel engines can be used as power in places where there is no power supply. Contact number 86-29-86031588