How to maintain hydraulic baler

Some customers reported that the equipment malfunctioned after half a year, but they did not know how to maintain the hydraulic baler?

NICKBALER is here to give you four suggestions, hoping to help you.
1. Do a good job at each start, check whether each component is installed properly, whether the screws and bolts are loose, etc. For safety reasons, flammable and explosive materials cannot be put into the hydraulic baler.
2. During the production process, pay attention to the uniformity of the blanking to ensure the quality of packaging and prevent production interruption. During the production process, in order to make the hydraulic baler perform smoothly, the hydraulic baler motor must not be overloaded.
3. Normally, we should not only check the looseness of the fastening of each part, but also pay attention to the wear of the easily damaged parts. If the wear is serious, we should replace the parts in time.
4. The rotational speed of the hydraulic baler is too high during operation, so in addition to the firm installation, good lubrication should also be maintained at the same time to ensure the normal operation of the hydraulic baler.
NICKBALER continues to improve the mechanism, strengthen the brand awareness, make the product quality better, better after-sales service, and serve customers in many ways. https://www.nkbalers.com