Iron Sheet / Iron Block
Release time: 2021-12-14 sentiment：926 time
Scrap iron sheets and iron blocks are very common in the field of industrial construction. After the scrap iron sheets and iron blocks are cut into sections by a gantry shearing machine, it is easier to transport and store, and easier to recycle. In this regard, NKBALER recommends two types of gantry shears, NKLMJ-400 and NKLMJ-2000, to cut scrap iron sheets and iron blocks. The cutting pressure of NKLMJ-400 is 400T, and the output per hour is 4-7 tons; NKLMJ-2000 The cutting pressure is 2000T, and the output can reach 60-80 tons per hour.
In recent years, with the improvement of people’s living standards, various construction steel companies have gradually increased, resulting in a large amount of waste steel waiting to be processed in the industry. In order to improve the recycling rate of resources, these waste steel must be processed For processing, gantry shears are used, which play an important role in cutting steel.
The gantry shearing machine has changed the development direction of the entire recycling industry, freeing up the labor force in the recycling industry, and continuously reaching new heights in profits. Stop and run at any working position, easy to realize overload protection.
Gantry shears are mainly used in metal recovery processing plants, scrap car dismantling yards, training the casting profession, cold shearing of various shapes of steel and various metal structural parts, and processing into qualified charge.
The gantry shearing machine cuts instead of manual dismantling to reduce the production cost to achieve high efficiency and convenience. The gantry shearing machine produced by our company has the advantages of high automation level, safe and stable work, and outstanding compressive effect.
NKBALER gantry shears can be customized for customers according to the actual materials that customers need to recycle.