Working principle of Sudan shearing machine

At present, with the strong support of national policies, the scrap steel shearing machine industry has ushered in a new round of upsurge. Scrap steel processing is a key energy-saving and emission reduction project supported by the state, and scrap steel shearing machines are the key equipment for scrap steel processing. , With the continuous increase of scrap steel resources, scrap steel shears have good application development prospects.

In the scrap steel processing industry, scrap steel shearing machines are mainly used to cut scrap steel wool into qualified materials that meet the purchase requirements of steel mills.
The gantry type scrap steel shearing machine is composed of a shearing mechanism, a material pressing mechanism, and a transmission device. It can also be divided into two parts: a mechanical part and a hydraulic part. Its working principle is driven by the electric motor to drive the hydraulic transmission device (where there is no power supply, the diesel engine can be used as power), and the hydraulic transmission device drives the pressing mechanism and the shearing mechanism to achieve the purpose of cutting the steel plate. The cutting mouth of the gantry type scrap steel shearing machine is composed of two upper and lower blades, the lower blade is mostly a fixed blade, and the upper blade is a movable blade. When the scrap steel enters the knife edge, the pressing device presses down and fixes the scrap steel, and then the upper blade moves downward to cut the scrap steel. After cutting, the upper blade and the pressing mechanism return to the original position and wait for the next cutting process, and so on.
NICKBALER metal shearing machine, small investment, fast profitability, and very simple actual operation, is the best choice for your scrap steel shearing equipment project. https://www.nkbalers.com