Reasons for the noise caused by the horizontal baler in Mexico

The horizontal waste paper baler sometimes produces noise during production: the noise produced by the equipment in normal production is very small, how the equipment produces unbearable noise during work, then the machine is already out in some aspects Problem, the cause of this problem may be improper operation or failure to carry out reasonable daily maintenance.

In view of the noise problem during the packing process of the horizontal waste paper baler, the following solutions are proposed according to different situations:
1. Check whether the pilot valve (cone valve) is worn and whether it can be tightly fitted with the valve seat. If it is abnormal, replace the pilot valve head.
2. Check whether the pressure regulating spring of the pilot valve is deformed or twisted. If it is twisted, replace the spring or the pilot valve head.
3. Check whether the oil pump and the motor coupling are installed concentrically and centered. If they are not concentric, they should be adjusted.
4. Check the equipment pipeline for vibration, and add sound-proof and vibration-absorbing pipe clamps where there is vibration.
There may be only one phenomenon of the problem, but there are many different reasons for this phenomenon. In the production process, we should continue to accumulate experience and master relevant knowledge so that the waste paper baler can operate normally.
NKBALER is a manufacturer specializing in the production of hydraulic balers. We have a professional R&D team and after-sales team. If you encounter any problems in use, you can contact our after-sales staff to provide you with solutions at the first time. https://www.nkbalers.com