The function of the buffer cylinder of the Moroccan hydraulic baler
Release time: 2022-06-14 sentiment:646 time
Athough after a series of improvements, the failure of the buffer cylinder of the hydraulic baler has been basically controlled, there is still a long way to go before the high requirements for equipment maintenance. The baler manufacturers believe that the buffer cylinder of the hydraulic baler should be fully utilized, and our future work should start from the following aspects.
(1) Improve assembly methods and skills to maximize the service life of the seal and reduce costs. After the sealing material changes, the tolerance matching between the piston rod and the cylinder, the piston and the cylinder, and the piston rod and the piston also changes to a certain extent.
(2) Grasp the law of deterioration of the dynamic seal and dust ring of the cylinder of the hydraulic baler. Carry out maintenance and repair according to the deterioration trend to prevent over-maintenance.
(3) Measure the buffer force by adjusting the size of the orifice and accumulate actual data, so as to adapt to the needs of different steel grades and different trolley running speeds, and solidify the data. In this way, the impact can be greatly reduced, and the packaging speed of the hydraulic baler can be increased, and at the same time, the labor intensity of the personnel can be reduced.
(4) As an interesting study, the relationship between the distance between the adjustment grooves of the damping holes on the cylinder body of the hydraulic baler and the acceleration of the buffer force can be studied. In this way, you can broaden your horizons and have a deeper understanding of the design ideas of cylinder buffer control
NKBALER's high-end technology makes the hydraulic baler more adapt to the development of the times and provide you with better services.