A detailed introduction to the workflow of the waste paper baler

Release time: 2022-08-10   sentiment:569 time

1. Before starting the machine, check whether the appearance of the device is abnormal, whether there are safety hazards around, and whether there are enough iron wires or plastic ropes. After confirming that it is normal, turn on the main air switch of the distribution box, and unscrew the pop-up emergency stop.Press the stop button, and the power indicator of the electric control box lights up.
2. Turn the remote control local gear selector switch to the remote control gear.
3. Put the magnetic switch on the remote control into the card slot, press the system start button on the remote control twice, the siren will sound for 10 seconds and then stop to warn the equipment to run, and the red warning light will be always on.
4. Press the conveyor belt start button on the remote control, the conveyor belt will run, push the paper or other materials into the conveyor belt inlet, and the conveyor belt will bring the material into the Baling machineinlet.
5. After the paper or other materials reach the position, press the compression button on the remote control, the red warning light will flash, and the indenter will automatically retreat and stop after it is pressed in place.
6. Repeat operation 4 until the required baling machine length, press and hold the Baling machine button on the remote control for 2 seconds, and then the equipment will start automatically. When the indenter advances to the front Baling machineposition, it will stop.Frequency alarm.
7. Press the threading button on the remote control, the threading machine will automatically return to the original position after threading the iron wire or plastic rope.
8. Knot the iron wire or rope and cut it to end the package.
9. Repeat steps 4-8 above. The bags from the bag outlet will be pushed out one by one, and the finished bags will be moved to a suitable place by a holding truck or a forklift and placed neatly.
10. After the work is completed, press the remote control system stop button, take down the magnetic switch, press the emergency stop switch of the electric control box, and turn off the main power.


That's all for today's introduction. I hope it can help you. If you have any other questions, you can pay attention to our website, or call to consult our manufacturers. We will serve you wholeheartedly and look forward to your call!86-29-86031588, https://www.nkbaler.net/