Reasons for tripping of plastic bottle balers in Togo

Release time: 2022-08-31   sentiment:521 time

In daily life, there will always be a lot of plastic bottles. These plastic bottles have a very large impact on the environment, and if they are recycled, they will be of great help to the environment and economic benefits. As a good baling machine,the plastic bottle baler is very practical. A friend inquired about the reason for the tripping of the plastic bottle baler. In fact, the reasons are:
1.In the normal operation of the plastic bottle baler, the current is usually large and sometimes small, which is a normal phenomenon, but the fluctuation range is not large. When the electrical work is overloaded, the load is too large, causing the current to exceed the rated value, and then jumping.
As long as the workload of the plastic bottle baler is kept within the allowable range, this problem can actually be avoided, which is not easy to happen. Check whether the current is too large, causing tripping; if the air switch is used for a long time, there will also be quality problems. When the current is small it will work, once the current is a little high it will trip.
The air switch is enough, and an experienced electrician can check it.
2.The pressure of the plastic bottle baler is too high and exceeds the rated pressure.
The hydraulic system of the plastic bottle baler will cause a mechanical failure of the hydraulic valve. A common manifestation of this mechanical failure is that a certain cylinder of the baler is not performing normal compression as instructed by the PLC (that is, the cylinder is not working), resulting in hydraulic pressure. The reason for the valve sticking is that the dust in the oil can cause the valve to stick. 
During constant movement, it is necessary to ensure the cleanliness of the fuel tank and the cleanliness of the oil to avoid mechanical failure of the hydraulic valve.

The above two points are the reasons for the tripping of the plastic bottle baler. We can eliminate the fault in time to avoid the occurrence of bigger problems caused by the fault. If you encounter other problems you want to know during use, you can contact our manufacturer at 86-29-86031588 in time.