Maintenance of gantry scissors
Release time: 2022-10-10 sentiment：444 time
- The use of gantry shears should be carried out in strict accordance with the operating procedures.
2. Add lubricating oil regularly, fixed-point and quantitatively according to the requirements of the lubrication chart each time before starting the machine. The oil should be clean and free of precipitation.
3. The gantry scissors should always be kept clean, and the unpainted part is rust-proof grease.
4. The lubricating oil in the motor bearing should be replaced and refilled regularly, and the electrical parts should be checked regularly to see if they are working normally, safely and reliably.
5. Regularly check whether the handles, knobs and buttons are damaged. If they are seriously worn, they should be replaced in time and reported for spare parts.
6. Regularly check and repair switches, insurances and handles to ensure reliable operation.
7. Lubricate the gantry scissors and scrub and clean the machine 10 minutes before leaving get off work every day.
8. It is strictly forbidden for non-designated personnel to operate the gantry scissors. Usually, people must leave the machine and stop. 
For more fault maintenance and maintenance work of gantry shears, please pay attention to the website of NICKBALER Machinery Co., Ltd.: https://www.nickbaler.net