Kuwait Waste Newspaper Baler

Common failure phenomena of waste paper balers: the entire hydraulic system of the waste paper baler has no pressure or insufficient pressure. Common causes of failure: the overflow valve fails and the oil pump does not work properly. The solution is as follows
1. Check the type of relief valve used in the waste paper baler equipment. If it is a pilot-operated relief valve, there are many reasons for the relief valve stuck valve or electromagnetic failure. If the relief valve is stuck, clean the relief valve and reinstall it. If it is electromagnetic failure, you need to check whether the circuit is open or not, and check the line of the relief valve at the same time.Whether the circle is burnt.
2. If there is a problem with the circuit, repair the circuit; if the coil burns out, the coil needs to be replaced. 
3. If the inside of the relief valve is worn, the relief valve needs to be replaced at this time.

NICKBALER reminds you that in the process of using the product, you must operate in accordance with strict operating instructions, which can not only protect the safety of the operator, but also reduce the loss of equipment and prolong the service life of the equipment. https://www.nickbaler.net