Precautions for Greek hydraulic shears

It is suitable for the cold shearing of scrap metal with various cross-sectional shapes such as round steel, square steel, channel steel, angle steel, I-beam, steel plate, steel pipe, etc. The following matters should be paid attention to during use:
1. Operate in strict accordance with the operating procedures.
2. Add lubricating oil regularly, fixed-point and quantitatively according to the requirements of the lubrication chart each time before starting the machine. The oil should be clean and free of precipitation.
3. The machine tool must always be kept clean, and the unpainted part of the machine must be kept clean with anti-rust grease.
4. The lubricating oil in the motor bearing should be replaced and refilled regularly, and the electrical parts should be checked regularly to see if they are normal, safe and reliable.
5. Regularly check whether the handles, knobs and buttons are damaged. If they are seriously worn, they should be replaced in time and reported for spare parts.
6. Regularly check and repair switches, insurances and handles to ensure reliable operation.
7. 10 minutes before leaving get off work every day, lubricate the machine tool and scrub and clean the machine tool.
8. It is strictly forbidden for non-designated personnel to operate the equipment. Usually, people must leave the machine and stop.
NICKBALER Machinery has a mature after-sales service system, 7 * 24 hours professional hotline service 86-29-86031588, quickly help you solve any incurable diseases, is your best choice!

NICKBALER hereby reminds you that you must strictly follow the operating instructions and pay attention to your own safety during operation.NICKBALER Line 86-29-86031588.