Safety Regulations For The Use Of Scrap Steel Gantry Shears

Scrap steel recycling is a green circular industry advocated by the state. There are many forms of secondary division of scrap steel. Among them, hydraulic gantry shears are the main equipment for processing scrap steel. Containers, waste boilers, mixed steel scrap, and pre-treated scrapped iron sheet car boxes, etc.
1. The gantry scissors should be used and kept by a special person, and the operator must be familiar with the structure and performance of the machine tool. 
2. It is strictly forbidden to use equipment with overload, and it is not allowed to cut and cut quenched steel, hard steel, high-speed steel, alloy steel, castings and non-metallic materials. the
3. The edge of the blade should be kept sharp. After the edge becomes blunt or damaged, it should be ground or adjusted in time. The blade is a four-sided blade, and other blades can be replaced after damage. the
4. When multiple people are operating, there should be a special person to direct and cooperate with the operation of the shearing machine. the
5. It is forbidden to cut two materials of different specifications at the same time on the gantry shears, and overlapping cutting is not allowed. the
6. It is forbidden to put your hand under the pressure plate when cutting the material into the gantry. You can use a stick or other auxiliary operations.

Nick mechanical baler has the characteristics of good rigidity, toughness and stability, beautiful appearance, convenient operation and maintenance, safety and energy saving, and low investment cost of equipment basic engineering. https://www.nkbaler.com