Hydraulic Scrap Metal Baler
Release time: 2023-11-13 sentiment：351 time
Hydraulic scrap metal baler is an important industrial equipment that uses hydraulic system to compress waste metal into compact blocks. This equipment is usually composed of a main machine, a hydraulic system, and an electrical control system.
The main machine mainly includes a compression chamber and a compression mechanism. The compression chamber is used to store the waste metal to be compressed, while the compression mechanism is responsible for compressing the waste metal into blocks. The hydraulic system is the key part that provides power for the compression mechanism. Through the pressure transmission of hydraulic oil, it drives the compression mechanism to work. The electrical control system is mainly used to control the operating state of the equipment, including starting, stopping, pressure adjustment and other functions.
Hydraulic scrap metal baler has the advantages of simple operation, high efficiency, and convenient maintenance. It is widely used in various fields of waste metal recycling, such as waste steel, aluminum profiles, copper wires, etc. At the same time, because it can effectively improve the transportation and storage efficiency of waste metal, it is also favored by many manufacturing enterprises.
|
Metal hydraulic baler major technique Number |
||||||||
|
1 |
Main pressure cylinder |
Type |
YG450/315-2500 |
Quantity |
1 |
|||
|
|
|
Intended push force |
3150KN |
return trip size |
2500mm |
|||
|
2 |
Side pressure cylinder |
Type |
YG320/220-2500 |
Quantity |
2 |
|||
|
|
|
Intended push force |
1600KN×2 |
return trip size |
2500mm |
|||
|
3 |
Small door cylinder |
Type |
YG220/160-630 |
Quantity |
1 |
|||
|
|
|
Intended push force |
1000KN |
return trip size |
630mm |
|||
|
4 |
Door lid cylinder |
Type |
YG280/160-2580 |
Quantity |
1 |
|||
|
|
|
Intended push force |
1250KN |
return trip size |
2580mm |
|||
|
5 |
Bale density |
≥1800 kg/㎡ |
||||||
|
6 |
hydraulic system work force |
25MPa |
||||||
|
7 |
Pressure Indoor Size |
2000*1400*1000mm |
||||||
|
8 |
Metal Mass Size |
500*500mm |
||||||
|
9 |
single to circulate time (not contain feeding time) |
about 140 s |
||||||
|
10 |
motor |
Type |
Y280S-6 |
Power |
37.5KW |
|||
|
|
|
regulations turn speed |
980rpm |
Quantity |
2 |
|||
|
11 |
hydraulic pump |
Type |
200YCY14-1B |
the maximum pressure |
31.5MPa |
|||
|
|
|
Intended row capacity |
200ml/R |
Quantity |
2 |
|||
|
12 |
Machine Power |
380V 50Hz |
||||||
|
13 |
Machine Size |
5650x3600x2900MM |
||||||
|
14 |
Door and edge of box have cut-knives |
|||||||
|
15 |
Machine Weight |
about 40T |
||||||