Waste Scrap Steel Metal Hydraulic Baler
Release time: 2023-11-16 sentiment：322 time
The waste scrap steel metal hydraulic baler is a specialized equipment used for compressing loose materials such as waste steel and metal. It utilizes a hydraulic system to compress the materials into blocks, making it easier for transportation and recycling. This equipment has the advantages of simple operation, high efficiency, and space-saving, and is widely used in the waste metal recycling industry.
The main components of the waste scrap steel metal hydraulic baler include a compression chamber, a compression head, a hydraulic system, and an electrical control system. The compression chamber houses the compression head that compresses the materials into blocks. The hydraulic system provides power to drive the compression head, while the electrical control system manages the overall operation of the equipment, including starting, stopping, and pressure regulation.
Operating the waste scrap steel metal hydraulic baler is straightforward, with just one button needed to start the process. It boasts high efficiency, enabling the rapid compression of loose materials into blocks, thereby improving work efficiency. Additionally, it saves space by reducing the volume of bulky waste steel and metal materials, lowering storage and transportation costs.
In conclusion, the waste scrap steel metal hydraulic baler is a practical piece of equipment that helps companies increase the recovery rate of waste steel and metal materials, reduce production costs, and protect the environment.
|
NKY81-2500A Metal hydraulic baler major technique Number |
|||||
|
1 |
Main pressure cylinder |
Type |
YG450/320-2600 |
Quantity |
1 |
|
|
|
Intended push force |
4000KN |
return trip size |
1850mm |
|
2 |
Side pressure cylinder |
Type |
YG220/160-1500 |
Quantity |
2 |
|
|
|
Intended push force |
950KN×2 |
return trip size |
1500mm |
|
3 |
Small door cylinder |
Type |
YG160/105-540 |
Quantity |
1 |
|
4 |
|
Intended push force |
500KN |
return trip size |
540mm |
|
5 |
Door lid cylinder |
Type |
YG180/120-1631 |
Quantity |
1 |
|
6 |
|
Intended push force |
800KN |
return trip size |
1630mm |
|
7 |
Bale density |
≥2000 kg/㎡ |
|||
|
8 |
hydraulic system work force |
25MPa |
|||
|
9 |
Pressure Indoor Size |
1800*1400*900mm |
|||
|
10 |
Metal Mass Size |
(~800)*450*450mm |
|||
|
11 |
single to circulate time (not contain feeding time) |
about 120 s |
|||
|
12 |
motor |
Type |
Y200L2-6 |
Power |
30KW |
|
|
|
regulations turn speed |
970rpm |
Quantity |
2 |
|
13 |
hydraulic pump |
Type |
160YCY14-1B |
the maximum pressure |
31.5MPa |
|
|
|
Intended row capacity |
160ml/m |
Quantity |
2 |
|
14 |
Machine Size |
4400*3200*2450mm(L*W*H) |
|||
|
15 |
Door and edge of box have cut-knives/ |
||||
|
16 |
Machine Weight |
about 21.9 T |
|||