Hydraulic Waste Paper Baling Machine

Hydraulic waste paper baler is a device that uses a hydraulic system to compress waste paper and other recyclable materials in order to reduce their volume and facilitate transportation and recycling. This type of baler is often used in resource recovery centers, paper mills, or other places where large amounts of waste paper need to be processed.
The core part of the machine is the hydraulic system, which generates strong pressure through a hydraulic cylinder to compress loose waste paper into regular rectangular or cubic bales. The operation process is roughly as follows:
1. Filling: The operator puts the collected waste paper materials into the hopper of the baler.
2. Compression: Start the hydraulic system, and the hydraulic cylinder pushes the pressure plate to compress the waste paper until it reaches the preset pressure value.
3. Binding: When the compression is in place, there is usually a binding mechanism that automatically binds the compressed paper package with plastic straps or wires to maintain its shape and density.
4. Packing out: The compressed and bound paper bags are removed from the baling machine and prepared for subsequent transportation or recycling.
The advantage of the hydraulic waste paper baler is its high compression efficiency, which can significantly reduce the volume of waste paper and save storage space and transportation costs. At the same time, due to the adoption of automated operations, the operating efficiency is improved and the labor intensity of workers is reduced. In addition, packaged waste paper is easier to sort, recycle and reuse, which is conducive to resource recycling and environmental protection.

Item	Name	parameter
mainframe parameter	Bale size	1100mm（W）×1100mm（H）×～1600mm(L)
	Material  type	Scrap Kraft paper, Carton, Cardboard ,Soft Film
	Material density	400～500Kg/m3（moisture 12-15%）
	Feed opening size	1800mm×1000mm
	Output	7-9tons/hour
	Main motor power	37.5KW+11 KW
	Main cylinder	YG220/160-2600
	Main cylinder force	100T
	Max. system working force	21MPa
	Mainframe weight(T)	About 19 tons
	Mainframe size	About 11×2.3×2.9M（L×W×H）
	Tie wire line	4 line φ2.75～φ3.0mm3 iron wire
	Pressure time	≤30S/ (go and back)
conveyor technology Chain	Model	NK-II
	Conveyor weight	About 5 tons
	Conveyor size	2000*12000MM
	terra hole size	7.303M（L）×3.3M（W）×1.2M（deep）
	Conveyor motor	5.5KW
Cooling system	Water tank	6M3
	Motor	0.75kw