How to use manual strapping machine

A manual cable tie baler is a small device used to bundle items. It uses plastic zip ties to tightly bundle items together to ensure that the items do not fall apart during transportation or storage. The following is how to use a manual cable tie baler:
1. Preparation: First, make sure the baler and cable ties are ready. Place the cable tie roll into the cable tie slot of the baler and make sure the cable tie can pass through the slot smoothly.
2. Place items: Place the items to be bundled on the base of the baler, making sure the items are flat and will not move.
3. Tighten the zip tie: Place the zip tie around the item so that it forms a closed loop. Then, insert the free end of the tie into the tensioning device of the baler.
4. Tighten the cable tie: Press the tightening handle of the baler to tightly bind the cable tie to the items. During the tightening process, the position of the tie can be adjusted appropriately to ensure the best binding effect.
5. Cut off the tie: When the tie reaches the desired tightness, release the tensioning handle. At this time, the strapping machine will automatically cut off the excess ties to complete the strapping process.
6. Check the bundling effect: After completing the bundling, check whether the items are firmly bundled together. If the binding does not work well, readjust the ties and repeat the above steps.
7. Clean the baler: After use, clean the tie residue on the baler to keep the equipment clean and running normally.

In short, the manual cable tie strapper is a simple and easy-to-use bundling tool. Just follow the steps above to easily bundle items together and ensure the safety of items during transportation or storage.