How Do You Tie The Rope On A Waste Paper Baling Machine?

The rope used in waste paper balers,often referred to as "golden rope," is an essential tool for securely binding the compressed waste paper packages.The use of golden rope ensures that the compressed waste paper packages maintain their shape during storage and transportation without loosening.The specific operational steps are as follows:Rope Feeding Process:Thread the baling rope through the automatic tensioning device of the equipment and place it along the baling belt slot.Tie the rope to the pull post at the bottom end of the baling slot,and rotate the automatic tensioning device 90 degrees.Feeding and Compression:Feed recycled materials such as waste paper and plastic film into the equipment.Close the machine door tightly,press the compaction button,and the equipment will start the automatic compaction process.
Tying and Knotting:Open the equipment door,thread the rope from front to back through the bottom wire slot,and then through the pressure plate wire slot back to the front.Pull the rope tight by hand and knot it.Package Ejection:Push the baling lever to a fixed position,press the rise button,and the bundle will automatically eject.Caution:Ensure no one is in front of the lower door when opening to prevent injury from the door springing open.Cyclic Storage:After the bundle ejects,reset the baling lever for the next compaction action.Move away the bundle and store it in a designated location,close and lock the machine door,and proceed to the next baling cycle task.Additionally,operators using waste paper balers should also pay attention to the following points:ensure that the environment around the equipment is clean and free of clutter before operation.Check that all parts of the baler are in good condition and confirm there are no safety hazards.When using golden rope,ensure its quality is qualified,without wear or damage,to avoid breakage during the baling process.Maintain focus during machine operation,follow operational procedures,and ensure safe production.

Correctly securing the rope of the waste paper baler not only ensures the compactness and overall aesthetics of the bundle but also helps improve efficiency and safety during storage and transportation.Following the correct operating methods can maximize work efficiency,reduce operational risks,and extend the service life of the equipment.