Working efficiency of Australian hydraulic baler

After the hydraulic baler is used for a period of time, the work efficiency will decrease. So what are the reasons for this situation?

1. It may be a problem with the hydraulic oil pump of the hydraulic baler. For example, if its oil supply fails to meet the demand (oil inlet pipe leakage), a similar situation will occur. If the overflow valve in the hydraulic baler is damaged (the plunger is severely worn) ), it will also seriously affect the output of the oil pump, thereby slowing down the speed of oil supply.
2. It may be that the hydraulic baler has a serious internal and external leakage of oil. In this case, if it works quickly, it will cause the oil pressure to be too low, but it will cause more serious consequences. In order to prevent the above-mentioned various situations If it happens, the hydraulic baler must be strictly inspected and tested by maintenance workers, and then used after troubleshooting, otherwise the consequences will be very serious.
NICKBALER has a professional after-sales service team. If you encounter any problems during the use of the product, you can consult at any time 86-29-86031588