Troubleshooting of Australian waste paper baler

After the automatic waste paper baler has been used for a long time, there will always be large and small problems. Once the problems are found, they must be solved in time to avoid serious disasters.

Common electrical circuit failures of automatic waste paper baler:
1. The electrical circuit of the automatic waste paper baler is broken, the electromagnet is not energized, and there is no control signal to replace the wire to energize the electromagnet.
2. The electrode is poorly welded, the joint is loose and re-welded, and the joint is welded.
3. The voltage is too low or unstable. Check the voltage at both ends of the electromagnet. The change value should be within 10% of the rated voltage.
In the normal production process, each machine maintenance person should do it, according to the maintenance manual and maintenance procedures of the packaging equipment of the machine, strictly perform the maintenance work within the specified period, reduce the wear speed of the parts, eliminate the hidden dangers of failure, and extend The service life of the machine.
NICKBALER has always been winning the market with quality and service, and has achieved one-stop service from pre-sale to after-sale, so that customers can use it with more confidence and satisfaction. https://www.nkbalers.com