Operational matters of Dutch gantry shearing machine

In the process of using the gantry shearing machine, it may be dangerous if the operation is not in place. Today, what are the precautions for the gantry shearing machine in the sale process?

1. Without professional training, people who do not understand the structure, performance and operating procedures of the machine are not allowed to open the machine without authorization;
2. The place where the gantry shears needs to be lubricated should be added at least once before each use according to the requirements of use;
3. The hydraulic oil that needs to be added in the oil tank should use high-quality anti-wear hydraulic oil, and it needs to be strictly filtered, and the oil volume must be sufficient. If the oil volume is found to be insufficient, the hydraulic oil should be added in time;
4. If there is a serious oil leakage or an abnormality occurs during the operation of the gantry shearing machine, the operation should be stopped immediately, the cause of the failure should be analyzed and the failure should be eliminated, and the operation should not be forced;
5. During the operation or Baler of the gantry shearing machine, the moving parts cannot be touched or repaired by hand;
6. When adjusting the valves, pumps and pressure gauges of the gantry shearing machine, experienced technicians are required to carry out the adjustments. If there is a problem with the pressure gauge, it should be checked or replaced with a new one.
NICKBALER is an enterprise specializing in the production and sales of hydraulic machinery, allowing you to purchase one-stop and worry-free after-sales. Contact number 86-29-86031588