Service life of Australian straw hydraulic baler

As a new type of mechanical equipment, the straw baler has been well received by farmers. It has greatly solved the problem of storage and transportation of straw, reduced the area of straw, and facilitated transportation. It is a good helper for farmers.

This Baler has been proved to be usable for 6-8 years. But some equipment has a long service life, and some have a short service life. Why? This is because some equipment is well maintained, and the service life will naturally be extended. Therefore, doing a good job in the daily maintenance and maintenance of the straw baler can greatly extend the service life of the baler and do a better job for you.
So how to maintain it, let us understand it together below:
Check the oil pipes for oil leakage before the shift.
Wipe the equipment, lubricate and add oil as required. Check whether the link shaft pins of each part are reliable. Run dry to check whether the sound of the straw baler is normal.
Pay attention to the running sound, whether the temperature, pressure, liquid level, electrical, hydraulic, and safety insurance of the equipment are normal.
Turn off the switch, remove straw chips and dirt, wipe off the oil on the guide rail surface and sliding surface of the equipment, and add oil. Clean up the work site, organize accessories and tools. Fill in the shift record and the record of operating the station, and go through the shift procedure.
Do a good job in the daily maintenance and maintenance of the straw baler, which can extend the service life of the baler and greatly improve the working efficiency of the baler. It is the baler that works better for you.