Common problems of Polish waste paper baler

The waste paper and waste paper baler is a hydraulic baler. In the whole process of long-term application, various problems will arise if the maintenance is not good.
In the process of dismantling and replacing the hydraulic cylinder of the fully automatic waste paper baler, it is necessary to do adequate preliminary preparations.
1. The hydraulic cylinder of the waste paper baler is the driving force implementing component in the hydraulic transmission system. Therefore, before disassembling the hydraulic cylinder from the machine and equipment, it is necessary to use a suitable support column to support the connecting member. To prevent damage to machinery and equipment, pay attention when disassembling, and carry out in accordance with the order of disassembly.
2. Before disassembling the hydraulic cylinder of the waste paper baler, the hydraulic circuit must be relieved of pressure. Otherwise, when the oil pipeline connected with the hydraulic cylinder is removed, the gear oil with working pressure in the circuit will be sprayed out along the connecting oil pipeline at high speed. , And there is a risk of damage to the machine.

Since its development, NICKBALER has a total of more than 150 models of various hydraulic balers, which are available from stock and can be customized according to the actual requirements of customers. Consultation telephone 86-29-86031588