Methods of prolonging the service life of large hydraulic gantry shears
Release time: 2022-09-06 sentiment:456 time
1. The operator must be familiar with the structure, performance and function of the gantry shearing machine blade, and must operate in strict accordance with the operating procedures. If multiple people operate, there should be a representative command.
2. Before each startup, according to the requirements of the lubrication chart, add lubricating oil regularly, at fixed points and quantitatively. The lubricating oil should be clean and free of precipitation.
3. Regularly check whether the gantry scissors, handles, knobs and buttons of the shearing machine are damaged. If the blades of the shearing machine are seriously worn, they should be replaced in time, and spare parts should be reported for replacement.
4. Regularly check and repair switches, insurances and handles to ensure their reliable operation.
5. The blade of the gantry shearing machine must be kept clean frequently, and the unpainted part is rust-proof grease.
6. The lubricating oil in the motor bearing should be replaced and refilled regularly, and the electrical parts should be checked regularly to see if they are normal, safe and reliable.
7. Select the shearing gap reasonably according to the thickness of the plate.
8. The plate should not be stained with impurities and hard objects.
9. Avoid cutting and welding thick materials.
10. It is forbidden to use the shearing machine blade with overload, and it is forbidden to push the handle on the pressure plate when feeding the material. When cutting the material, it should be pressed with an iron plate.
11. Avoid over-limit shearing of thick plates. Regularly adjust the upper and lower blade clearance.
12. 10 minutes before leaving get off work every day, lubricate the machine tool and scrub and clean the machine tool.
13. It is strictly forbidden for non-staff to operate the equipment. Usually, people must leave the machine and stop.
14. Select the shearing gap reasonably according to the thickness of the plate.
If you want to know more about daily maintenance and maintenance precautions, you can visit the NKBALER website https://www.nkbaler.com/, I hope it will be helpful to you!