Greek Metal Baler

With the gradually rising temperature, the temperature of the hydraulic oil baler will increase. When it reaches above 80 degrees, because of the different thermal expansion coefficients, the relative gap and the movement state of the hydraulic components between the running components will issue abnormal changes in oil temperature. When the oil temperature exceeds 60 degrees, the viscosity of the oil will decrease, the leakage will increase, and the sliding part of the oil film will be destroyed, which will increase the wear of the hydraulic components and accelerate the temperature rise.
The temperature of the rising hydraulic oil is not only affected by the surrounding environment, but also by other reasons. It is found that when the oil temperature of the hydraulic machinery rises, customers can find out the reasons from the following aspects:
1. Poor heat dissipation of the metal baler
Too thick dirt deposited on the surface of the radiator will cause heat, poor ventilation, and cause the oil temperature of the hydraulic tank to be too high; if the liquid level is too low and the system of circulating oil is not enough, it will lead to high temperature of the system.
2. Selection of hydraulic oil
Improper selection of hydraulic oil brands, especially viscosity index oils, will directly threaten the normal operation of the hydraulic system. The viscosity range and viscosity change of hydraulic oil are as small as possible, so the selection of hydraulic oil should also be considered in specific regions and seasons; oil marking machines with clear regulations should be filled in strict accordance with the regulations of the hydraulic oil to be filled .
3. Improper adjustment of the pressure of the metal baler
The system pressure relief valve adjustment is too high to carry out normal overflow and pressure reduction, resulting in an increase in internal leakage and a rise in temperature.
4. Hydraulic pump suction
The intake air of the hydraulic pump is mixed with the air in the oil too much, forming a "cavitation phenomenon", and under the high hydraulic shock, it is accompanied by strong vibration and noise, resulting in a rapid temperature rise.
5. Component wear
Severe wear on hydraulic system components can cause the system to overheat. Many parts of the components in the system rely on sealing gaps. Once the hydraulic components are worn, this will lead to increased internal leakage, resulting in increased temperature, reduced oil viscosity, and finally further increased internal leakage, resulting in oil temperature. Further increase, forming a vicious circle.
6. Leak
In the process of energy transfer, if the leakage is serious, it will increase the volume loss of the system, and the loss of energy is converted into the high temperature heat energy of the system.

NICKBALER Machinery is a manufacturer specializing in the production of balers, and can also customize the machine according to your requirements; if you have a demand, please let us know, and we will recommend the best solution according to your specific requirements. https://www.nickbaler.net