Requirements for the working environment of the Greek vertical hydraulic baler

The impact of the environment on people is very large, and the same is true of machines. No matter how good people and machines are, if they are not placed in suitable positions and environments, they will not be able to achieve twice the result with half the effort. Today we will take a look at the vertical hydraulic baler with you. Requirements for the working environment.
1. The general environment for placing the vertical hydraulic baler. Be sure not to choose a place that can be directly exposed to sunlight, or a place with too much dust, which is very easy to cause machine pollution, and it is not conducive to cleaning for operators. Being in such an environment for a long time is very harmful to the vertical hydraulic baler. It is big, and it is not too wet. We know that a too humid environment can easily cause a short circuit, and the wire failure rate of the vertical hydraulic baler will increase.
2. When we operate the machine, we must ensure that the power connection of the machine is correct, the wire is grounded, and during operation, ensure that our machine is running normally.
3. After the machine is used for a long time, its heating plate will be very hot, so please do not directly touch the heating plate of the machine with your hands to avoid unnecessary harm to people.
4. During the working process of the vertical hydraulic baler, the head and hands cannot be passed through the runway of the belt. This behavior is quite dangerous. We must remember safety first.
5. Pay attention to wearing parts. After long-term use, it will definitely cause wear and tear, so we should pay attention to replacement.

If you want to master more skills and skills about hydraulic balers, please contact us at 86-29-86031588