Why is the wheel of the plastic film baler broken?

1. The reason why the wheel of the plastic film baler is broken is because it is caused by external pressure. During the balanced operation of the wheel, the wheel and bearing will not be damaged without any resistance, as long as External pressure will cause bearing damage. What factors will cause the poor adhesion of plastic film balers?
1. It may be that the temperature is too high or not enough
2. The sharpness of the knife edge determines the service life of the machine wheels.
3. The quality of the wheels is the top priority. The use of steel ball bearings is easy to cause damage to the wheels. Therefore, the use of needle roller bearings instead of steel ball wheels is the primary condition. At the same time, the force area of the wheels is increased. 
4. When the plastic film baler is baling, ensure that the ground is flat and smooth.

If you want to know more about plastic film baler, you can go to NICKBALER Machinery's website:https://www.nickbaler.net, or you can call our sales phone: 86-29-86031588.