The Togo Beverage Bottle Baler Cannot Be Impacted During Use

The emergence of the beverage bottle baling machine has improved our production efficiency and saved our costs. We are careful not to collide when using it, please read the following carefully.
1. The beverage bottle baler is heated on the heating rod, and the adhesive under the heating plate acts as an insulating material. If damaged, it should be replaced in time to avoid short circuit.
2. The working pressure of the beverage bottle baler is set to 0.3 MPa, which is more suitable for the working air source and inflation air source provided by the user of the beverage bottle baler, and most of them cannot be adjusted without special circumstances.
3. It is not allowed to place, hit or push the waste paper baler during processing. For beverage bottle balers, the direct air pump motor is not allowed to be reversed to ensure the normal operation of the direct air pump. The oil level should be checked frequently.
4. The normal oil level is 1/2-3/4 of the oil window (can not exceed). When there is moisture in the vacuum pump or the color of the oil turns black, the new oil should be replaced at this time.
5. When the beverage bottle baler is working, it will be ventilated and then powered on. When the machine is turned off, turn off the gas first. Always check the decompression, filtration and oil mist combo 24 to ensure that the oil mist (sewing oil) and the filter cup in the oil mist cup are free of water.
6. Heating strips and silicone rubber strips should be kept clean and free of foreign matter so as not to affect the sealing quality.
7. The beverage bottle baler should run continuously for 2-3 months to open the back cover 30 and increase the lubrication of sliding parts and switch protrusions. The joint activity on the heater rod should be lubricated according to the application.
8. Do not put your hand under the heater to prevent injury, and turn off the power immediately in case of emergency.

To sum up, the above content tells you to be careful not to collide during the use of the beverage bottle baler, hoping to help everyone use the beverage bottle baler better. For more information about the beverage bottle maker, please pay attention to the official website news update status. https://www.nickbaler.net